Peel & Stick
Peel & Stick Delft-Style Tiles — Motif Box
Peel & Stick Delft-Style Tiles — Motif Box
The Delft wall, motifs included — without the renovation.
Pre-order · first run sold out · second run dispatches from 1 December
Each tile is 297 mm square; a box of ten covers about 0.88 m².
Two boxes make a standard splashback.
Couldn't load pickup availability
Pre-order — dispatching from 1 December, tracked. the first run sold out; yours is in the second.
What they are
Our hand-painted motifs, already in place.
Sixteen paintings from the studio — the pansy, the tulip, the teapot, the rooster — printed across ten peel-and-stick tiles in our Dutch Blue. No two tiles are the same: some carry one motif, some two or three, and one is left quiet. Lay them out in any order and the wall is yours; rearrange them and it becomes another wall entirely.
A high-end finish that installs before the kettle boils.
Pre-order: the first run sold out — the second run dispatches from 1 December.
Sold as a box of ten tiles, 297 × 297 × 2.3 mm, covering 0.88 m² (box 315 × 315 × 30 mm). Apply to any smooth surface — kitchen splashback, bathroom vanity, feature wall. No grout or special tools.
How the motifs are arranged
Sixteen motifs, printed at offset positions across nine of the ten tiles — some carry one painting, some two or three, and one tile is left quiet. It’s the ‘random, but intentional’ scatter: the most popular layout for our ceramic Delft walls, where motifs land like punctuation in a quiet field of corners.
Lay the ten tiles in any order — the offsets do the work, and the wall reads as placed by hand. No two boxes need go up the same way.
Details & care
- Dimensions: 297 × 297 mm, 2.3 mm thick
- Coverage: a box of ten covers about 0.88 m²
- Box: 315 × 315 × 30 mm
- Material: premium vinyl with a high-resolution printed surface, EVA foam adhesive backing
- Finish: gloss — 3D PU gel, thick enough to hide the grout lines underneath
- Care: a soft damp cloth for everyday marks; a mild household spray for grease. No abrasive pads or solvents — they dull the gel surface.
How to put them up
No grout, no adhesive, no tradesperson.
- Measure the surface, allowing for edges, corners and anything you'll cut around.
- Plan the arrangement before you commit — shuffle the ten tiles until the scatter feels right. The motifs are already on the tiles.
- Cut to fit with a Stanley knife and ruler; scissors for smaller curves. Cut the quiet tile first — it was made for the edges.
- Clean the wall — it must be smooth, dry and free of dust or grease.
- Peel and stick: pull back the release film and press firmly.
Where they work (and where they don't)
Surfaces: smooth, clean and dry — painted walls, existing ceramic tiles, glass, MDF, campervans. Not rough or heavily textured walls, and not fresh paint (give it four weeks to cure).
Over existing tiles: yes — at 2.3 mm they cover grout lines completely, so nothing needs removing. This is the renter's favourite.
Wet areas: splash-proof, so vanities, splashbacks and laundry walls are fine. Not inside a shower recess or anywhere water runs continuously.
Behind a cooktop: fine behind an electric hob, keeping about 30 cm clear. Not behind a gas hob — an open flame is a fire risk.
Floors: no. These are for walls only.
Coming off: they remove cleanly from most painted surfaces — peel slowly at a low angle, with a little heat from a hairdryer if needed. Test a small patch on older paintwork first.
Shipping & returns
Pre-order — the first run sold out; the second run dispatches from 1 December, tracked, from our Sydney studio. Shipping is calculated at checkout.
Returns are welcome within 30 days of delivery, unopened and in original condition.

One box is a moment. Two are a splashback.
a standard splashback takes two boxes — and no two boxes need go up the same way.

